Universal NiCd, NiMH, LiIon power tool battery charger base for 7.2V-20V* batteries (Adaptor plates required. Sold separately). 

Great for the tradesman who has many brands of power tools 

Features: 

• Input: 100-240VAC, 50-60Hz, 1.2A, 70W 
• Output: 
  • 7.2V-20VDC 1-3A. Please see note below re 20V batteries. 
  • 2 x 5V 2.1A max. USB output. 
• Interchangeable adaptor plates (sold separately) to charge a variety of powertool batteries from different brands. See below to view the range of adaptor plates. 
• Supplied with 1100mm SAA approved 100-240VAC world voltage input power cable. 
• Short circuit protection. 
• Reverse polarity protection. 
• Over temperature protection. 
• Max 2.5 hour charging limit protection. 
• Low voltage slow charge safety protection. 
• LED status indicators: 
  • GREEN = Ready / Charge complete 
  • RED = Charging 
  • Flashing RED = Error 
• Dual USB output ports to charge portable devices from phones to tablets. 
• *Note: Due to variations in manufacturer labelling guidelines, some batteries may be labeled as 18V or 20V. In both cases, the battery pack contains five LiIon cells in series, hence 5 x 3.6V (or 3.7V depending on the cell used) equates to an 18V-18.5V battery pack. Therefore, a battery pack labeled as 20V wil typically have a nomial voltage of 18V and will still be compatible with this charger, provided the correct adaptor plate is used.